LED Alu Profile TE-4 kpl. not anodized

The wide flange of the TE-4 profile is designed to be covered in standard materials for joining and finishing drywall surfaces.
PDS4-ALU and PDS4-K  are mounted by "click". This allows easy installation of lighting fixtures and non-invasive removal of fixtures for service purposes.

Mounting

The TE-4 KPL. profile can be mounted in pre made slots of drywall structures using gypsum adhesive (GS 20  CECOL) or mounting adhesive. After the adhesive dries, cover the aluminum flanges thinly with a suitable adhesive, put on the reinforcing mesh and putty. When dry, sand the putty carefully so that the edges of the profile are visible. Such a prepared surface fitted with the TE-4 profile can be finished by painting.

All finishing must be carried out with the profile liner in place protecting its interior against soiling. After completion of these works, remove the liner, remove any remnants of putty or paint, check  the elastic mounting cord for damages and gently push the fixture into place. TE-4 profiles are sold with an integrated elastic mounting cord, and a liner protecting the mounting chamber from excessive dirt.

NOTE! The profile fitted in a wall, ceiling, etc. must maintain a straight line. Excessive bending of the profile to the curvature of the surface in which it is fitted will prevent the mounting of the fixture.